Peak Structural, Inc. serving Divide, CO 80814

Responsible basement waterproofing, foundation & crawl space repair, and concrete leveling company serving Divide, CO

We not only adhere to the highest industry standards, we strive to be the industry leader in the home improvement related services we provide. We also use state-of-the-art products and technology which are designed to fix your home. We are the authorized Basement Systems dealer in Divide, Colorado.

Services we offer in Divide:

Wet/flooded basement waterproofing solutions.
Lifetime warranty on all perimeter waterproofing systems.
Foundation and structural repair solutions.
25-year warranty against manufacturing defects on foundation products.
Crawl space sealing with CleanSpace vapor barrier.
Concrete lifting and leveling with PolyLEVEL (mudjacking alternative).
25-year warranty on crawl space encapsulation systems.
Financing Available
Written estimates and inspections and fast installation

News from Divide

How Important is Positive Drainage For My House? Part 3 of 3

Friday, August 13th, 2010 by Cassi Henes

Minimizing the destructive effects of shifting soils have proven to be a real challenge for property owners who are concerned about  preventing structural damage to their foundations, as well as preventing mold and water intrusion in their homes. The importance of creating and maintaining a positive downhill slope condition away from their foundation is paramount, and happily, is one of the most relatively inexpensive and easily achieved preventative measures available. Our focus in this article will be on the practical how’s and why’s of good positive drainage.

The last 20-30 years have taught some painful lessons to the professional engineer and building communities as they have incurred vast financial penalties. Old conventions about adequate foundation design have proven to be unreliable. As it turns out, you can’t simply build foundations the same way in Dallas as you do in Dubuque or in Pittsburgh as you do in Portland, and expect a predictable outcome. As a result, more stringent codes now dictate that a methodical process be employed to first test and identify the properties and characteristics of the soil on a given building site. The results of such an analysis are published in what is commonly known as a “soils letter” or “soils report”. A soils report is a critical packet of information that serves both to advise the foundation design process going forward, as well as to inform present and future owners of that property about their responsibilities to maintain conditions that will minimize the risk of structural damage over the long term.

The most basic of all these responsibilities is the maintenance of positive sloped drainage. This is usually defined in most soils reports as a condition where at least 6″-10″ of drop occurs in the first 10′ of run out from the foundation. Another way of expressing the same thing is to express the angle of the slope by means of a percentage; 6%-10% positive slope for mulched or rock bed areas, and 2%-3% positive slope for hard paved areas, such as sidewalks, driveways, or parking lots. (A lesser slope is usually acceptable for paved areas because hard surfaces like concrete or asphalt naturally conduct water away from the foundation much more efficiently than a porous surface like a mulch bed) With a few basic tools and a bit of patience, these slope percentages may be determined by the average property owner wishing to prevent needless structural and/or water damage to the foundation of his/her property. The process of doing so is as follows:

  • First, choose a point along the foundation wall and place one end of a 10′ long straightedge (such as a 2 x 4) at the same point while extending it out perpendicularly from the foundation.
  • Next, place a carpenter’s level on top of the 2 x 4 while you gradually raise the far end of the 2 x 4 until the bubble indicates a level condition has been achieved.
  • Finally, simply measure down from the elevated end of the 2 x 4 to the ground directly beneath is and make note of that dimension. For this example, let’s suppose that our vertical measurement is 10″.

Now, you have all the raw data you need to calculate your slope percentage. The math is simple: divide the vertical dimension, known as the “rise” by the horizontal dimension, which is known as the “run”. Don’t forget to convert your units of measure as needed so that they are consistent. In our example, we would have 10″ (our rise) divided by 120″ (our run), equaling.083, which we could round to 8%. As a rule of thumb, an 8% positive slope downward would be considered to be a safe and effective amount of slope to quickly move water away from the foundation before it can penetrate to deeper layers of soil and cause problems. Sometimes, calculating slope or determining what a safe and effective grade may be difficult, so it is possible to have a geotechnical engineering firm or other foundation related company come out and do the calculations.

With a slope calculation, it’s easy to find problem spots on your property and change the grade to protect your home. You should check the slope of your property, especially when your home is a new construction, after spring melt. Settling and changes in the grade are often caused by changes in moisture and run off. Preventative maintenance like this can save from a flooded basement, a muddy crawlspace, or even cracked and settling foundations.

Increase in Basement Sump Pump Failures in Colorado Springs Due to Severe Weather

Monday, November 9th, 2009

Severe weather all along the Front Range in Colorado has caused an increase in the number of basement sump pump failures. Last week some areas in Colorado received up to 3 feet of snow including Castle Rock, Parker, the Palmer Divide, Woodland Park and many different areas.  This was followed by a warming trend.  A lot of the snow has melted, refrozen, and melted again following the snow storm and causing the sump pump failures in basements.

Here at Peak Basement Systems, we are expecting to see is an increased number of phone calls from people with failing sump pumps. This seems to happen every time after snow melts like we’ve been experiencing over the last few days.

So what we’re asking people to do if if they believe that their sump pump is not able to handle a tremendous amount of snow melt runoff is that they should contact us immediately in order to have someone come out and take a look at it and see if we can work out either a temporary emergency sump pump solution or a permenant basement sump pump system that would be more able to handle the snow conditions that we are expecting this winter.

Work Requests Divide

Lost Lake Drive in Divide

Please contact soon we have a issue with our home.

Testimonials Divide

“I loved the Crawlspace [Science] book! The book was the deciding factor!”
– Sara S. of Divide, CO